Sale:
$40.00
The SF000 Breakout Board connects the LightWare SF000/B (50m) to various platforms, including:
* Pixhawk Serial & I2C Connectivity
* Arduino Serial & I2C Connectivity
* Raspberry Pi Serial & I2C Connectivity
The SF000 Breakout Board does not require soldering. You can install, remove, and reuse the SF000 Breakout Board.
R458-ACC.BOB.000
Manufactured by
LightWare Lidar LLC
The SF000 Breakout Board connects the LightWare SF000/B (50m) to various platforms, including Pixhawk Serial, I2C Connectivity Arduino Serial, I2C Connectivity Raspberry Pi Serial and I2C Connectivity
- The SF000 Breakout Board does not require soldering. You can install, remove, and reuse the SF000 Breakout Board.
The SF000 breakout board is a handy little board that gives ease of connectivity to the SF000 to various platforms.
- Compatible with Pixhawk Serial & I2C, Arduino Serial & I2C, Raspberry Pi Serial & I2C, and Servo Control
Characteristics | |
Weight | 0.01 lb |
Measurements | 1 x 1 x .025 inches |