USB Serial UART Converter

Sale:
$12.50
This serial adapter bridges UART serial data to USB as a virtual serial port. The connector allows you to communicate with a device that requires serial data at common serial baud rates.
S27-USB-SERIAL
Manufactured by

Acroname's USB to serial adapter uses the industry leading FTDI chipset to bridge from USB to UART. It also provides a 5V output rail and signal level. It is compatible with slave devices which use 3.3V signal levels, as long as they are 5V tolerant. The device is fully powered from the USB bus. Driver support is available for Windows, Mac OS X and Linux at baudrates from 300bps to 3Mbps.

UART Tx/Rx pins are clearly labeled with direction arrows to eliminate confusion of data direction.

Old versions of the S27 are labeled with STX and SRX. These refer to the direction of the slave device serial direction. I.e. STX is for bits going from the slave device to the USB host; SRX is for bits going from the USB host to the slave device.

  • USB Bus Powered
  • 5V signal levels; 3.3V tolerant
  • FTDI chipset
  • Cross-platform driver support
  • Simple virtual COM port interface

Common Serial Baud Rates

STANDARD ACTUAL ERROR
300 300 0.00%
600 600 0.00%
1200 1200 0.00%
2400 2400 0.00%
4800 4800 0.00%
9600 9600 0.00%
19200 19230 0.16%
38400 38461 0.16%
57600 57692 0.16%
115200 115384 0.16%
230400 230769 0.16%
460800 461538 0.16%
921600 923076 0.16%